Welcome to STARMECH


	FLOW METER
–	FLOW METER

	FLOW METERS (Compact Type)
–	SQUARE EDGE ORIFICE FLOW METER

	FLOW ELEMENTS
–	ORIFICE PLATE ASSEMBLY
–	INTEGRAL ORIFICE PLATE ASSEMBLY, METER RUN ASSEMBLY & HONED METER RUN ASSEMBLY
–	AVERAGING PITOT TUBE (FLUID-BAR)
–	FLOW NOZZLE
–	VENTURI TUBE
–	AEROFOIL

	VALVE MANIFOLDS & ACCESSORIES
–	ISOLATION VALVE NEEDLE TYPE
–	TWO VALVE MANIFOLD
–	THREE VALVE MANIFOLD
–	FIVE VALVE MANIFOLD
–	CONDENSING POTS, SYPHON, AIR HEADER

	WATER FLOW LABORATORY
–	WATER FLOW LABORATORY

VALVE MANIFOLDS – FIVE VALVE MANIFOLD

Five valve manifold is used in combination with differential pressure transmitter providing isolation, equalizing & drain/test functions. It allows the operator to isolate zero adjust the instrument & safely drain any trapped medium. The drain ports have dual functions. They can also be used as test or calibration connections after the draining operation.


Material	:	CS, SS 316, SS 304, Monel, Hastelloy C

Direct Mounting

This manifold is suitable for direct mounting to a differential pressure transmitter which has outlet flanged connection centers at 54 x 41.3 mm. 2 Nos. of neoprene rubber manifold to instrument sealing rings & 4 nos. of 7/16” UNF carbon steel bolts are supplied with the manifold.

Inlet		Outlet		Drain / Test
1/2”NPT(F)	:	Flanged	:	1/4”NPT(F)

Remote Mounting

This manifold is suitable for remote mounting from differential pressure transmitter. The base mounting holes are suited to 2 nos. of M6 bolts.

Inlet		Outlet		Drain / Test
1/2”NPT(F)	:	1/2”NPT(F)	:	1/2”NPT(F)