Welcome to STARMECH


	FLOW METER
–	FLOW METER

	FLOW METERS (Compact Type)
–	SQUARE EDGE ORIFICE FLOW METER

	FLOW ELEMENTS
–	ORIFICE PLATE ASSEMBLY
–	INTEGRAL ORIFICE PLATE ASSEMBLY, METER RUN ASSEMBLY & HONED METER RUN ASSEMBLY
–	AVERAGING PITOT TUBE (FLUID-BAR)
–	FLOW NOZZLE
–	VENTURI TUBE
–	AEROFOIL

	VALVE MANIFOLDS & ACCESSORIES
–	ISOLATION VALVE NEEDLE TYPE
–	TWO VALVE MANIFOLD
–	THREE VALVE MANIFOLD
–	FIVE VALVE MANIFOLD
–	CONDENSING POTS, SYPHON, AIR HEADER

	WATER FLOW LABORATORY
–	WATER FLOW LABORATORY

VALVE MANIFOLDS – TWO VALVE MANIFOLD

A Two valve manifold combines facilities for isolation, calibration, test & venting of the instrument. This manifold is generally used with pressure gauges, transmitters, pressure switches & similar pressure measurement equipment. The manifold are available in number of configurations to suit every type of installation. A variety of mounting / support methods are possible .

Material

CS, SS 316, SS 304, Monel, Hastelloy C

Vertical Inlet, Outlet & Drain/Test Connection

For line installation and suitable for wall mounting using 2 nos. of M8 bolts

Inlet		Outlet		Drain / Test
1/2”NPT(F)	:	1/2”NPT(F)	:	1/4”NPT(F)

Horizontal Inlet, Instrument Flanged Outlet & Drain/Test Connection

Suitable for direct mounting to gauge pressure transmitters. 1 No of P.T.F.E. ring, manifold to instrument sealing ring with 2 Nos. of 7/16” UNF carbon steel bolts are included with the manifold. The drain valve bonnet is on left hand side. The manifold can be base mounted using locating pin & mounting bolt.

Inlet		Outlet		Drain / Test
1/2”NPT(F)	:	Flanged (12.0 mm hole at 41.3 mm apart )	:	1/4”NPT(F)

Vertical Inlet, Outlet & Drain/Test Connection for PT 3051

Suitable for direct mounting to pressure transmitter, Fisher-Rosement model PT 3051.

Inlet		Outlet		Drain / Test
1/2”NPT(F)	:	1/2”NPT(F)	:	1/4”NPT(F)